Fast, Reliable Chimney Liner & Rebuild Across Hicksville
If your Hicksville home was built between 1947 and 1965, your chimney is likely 60 to 75 years old. A stainless steel liner installation in Hicksville typically runs $2,800-$4,500, while a partial rebuild starts around $3,500 and a full chimney rebuild can reach $8,000-$15,000 depending on height and access. We’re usually on-site in Hicksville within 24 to 48 hours, and most liner and rebuild jobs finish in a single visit. Call (855) 950-3861 - a live person answers, day or night.
We’ve been working on Hicksville chimneys since 1984. We know the Cape Cods off Jerusalem Avenue, the ranches along South Oyster Bay Road, and the split-levels near the Broadway Mall. These homes share a common history: masonry chimneys built for oil heat, later converted to gas, often with flues that were never properly resized or relined. That history shows up in our inspections - cracked terra cotta, abandoned oil flues bricked over in basements, crowns deteriorated from decades of Nassau County freeze-thaw. We document everything with photos and give you a plain-English verdict. No surprises on the bill.
Why Hearthstone Chimney Co. of New York City Is Hicksville’s Preferred Chimney Liner & Rebuild Company
Forty-two years in this trade means we’ve seen Hicksville’s housing stock age in real time. The 1950s ranches that were new construction when we started are now legacy homes with legacy chimneys. Homeowners in the 11801 and 11819 ZIP codes call us because we understand what they’re looking at - and we don’t treat an oil-to-gas conversion chimney like a new build.
Our Level-2 camera inspections end with photos you can see and a plain-English verdict. We don’t hand you a checklist and hope you trust us. We show you the cracked flue tile, the spalled mortar joint, the abandoned oil flue drafting cold air into your stack. Then we explain what it means and what it costs to fix.
Our technicians are background-checked and uniformed, and they complete most jobs in a single visit. We offer no-hassle upfront pricing - the number on the estimate is the number on the invoice. And every job is backed by our 90-Day Done Right Promise: in writing, no arguing. If it’s not right, we come back.
A live person answers our phones 24 hours a day, 7 days a week. Not a voicemail. Not a callback queue. When you call (855) 950-3861, someone picks up.
Our Chimney Liner & Rebuild Services in Hicksville
Stainless Steel Liner Installation
Most Hicksville chimneys need a stainless steel liner. The original terra cotta flue tiles in your 1950s Cape Cod or ranch have reached the end of their service life. Spalling, horizontal cracking, and flue gas erosion are standard findings in our Level-2 inspections here. We install DuraFlex stainless steel liners, sized precisely for your current heating appliance. A proper 7-inch liner for a gas furnace retrofit, for instance, corrects the oversizing that causes condensation damage in converted oil chimneys. In Hicksville, a stainless steel liner installation typically runs $2,800-$4,500, including the inspection, liner, top plate, and connection. Most jobs finish in one day.
Flexible Liner Installation
Some Hicksville chimneys have offset flues or tight cleanouts that make rigid stainless steel impractical. For these, we use flexible liners that navigate offsets while maintaining proper draft. The flexible option costs roughly the same as rigid in most Hicksville applications - $2,800-$4,500 - but saves the labor of dismantling and rebuilding chimney sections to achieve a straight run. We see this often in split-levels near the Hicksville LIRR station, where chimney chases were built around interior framing with minimal clearance.
Liner Replacement
If your existing stainless steel or aluminum liner has failed - corrosion, separation at joints, or improper original sizing - we remove and replace it. Hicksville’s maritime-influenced climate, with salt-laden air from Long Island Sound roughly 10 miles north, accelerates oxidation of lower-grade metal components. We replace with professional-grade DuraFlex or equivalent, properly sized and sealed. Liner replacement in Hicksville runs $2,200-$4,000 depending on flue length and accessibility.
Partial Chimney Rebuild
When the upper courses of brick, the crown, or the flue surround are compromised but the lower structure is sound, a partial rebuild is the right call. In Hicksville, we commonly rebuild crowns and the top 4 to 6 feet of chimney on 1950s ranches where freeze-thaw cycling has destroyed mortar joints. The abandoned oil flue opening, often left uncapped at the crown, accelerates this deterioration by allowing water and debris directly into the stack. Partial rebuilds in Hicksville start around $3,500 and typically top out at $6,500 for standard-height homes.
Full Chimney Rebuild
When the chimney structure is failing from the roofline down - extensive spalling brick, compromised lateral stability, or multiple flue failures - we dismantle and rebuild. This is more common in Hicksville than owners expect. Sixty years of freeze-thaw, combined with uncapped abandoned flues and improper oil-to-gas conversions, leaves some chimneys structurally unsound. A full rebuild on a typical Hicksville ranch or Cape Cod runs $8,000-$15,000 depending on height, brick matching, and whether we need to reconstruct one or both flues. We use professional-grade materials throughout, and we match existing brick profile where possible.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hicksville
We don’t use builder-grade substitutes. For Hicksville liner and rebuild work, we stock and install DuraFlex stainless steel liners, HeatShield cerfractory resurfacing products for select flue restoration, and Gelco and Copperfield chimney caps and chase covers. These are the brands specified by chimney professionals nationwide, and we keep common sizes in stock so Hicksville jobs don’t wait on shipping. When we rebuild a crown on a Jerusalem Avenue Cape Cod or install a chase cover over a sealed oil flue on a South Oyster Bay Road ranch, we’re using materials rated for the actual conditions - not the cheapest option that gets us out the door.
Common Chimney Liner & Rebuild Problems We See in Hicksville Homes
- Uncapped abandoned oil flues. On a 1954 ranch on Woodbury Road, we found the original terra cotta flue tiles cracked by years of freeze-thaw cycles, with a secondary oil flue simply bricked over in the basement but open at the crown. We installed a 7-inch DuraFlex stainless steel liner to downsize the oversized flue for the new gas furnace, then fully rebuilt the crown and installed a chase cover to seal the abandoned oil flue. This scenario - bricked over below, open above - is routine in Hicksville.
- Spalled and cracked terra cotta flue tiles. The original flue liners in Hicksville’s 60-to-75-year-old chimneys are at or past their service life. Horizontal cracking and spalling cannot be repaired; the flue must be relined or the chimney rebuilt. Nassau County inspection standards flag these conditions, and we document them with camera footage.
- Improper flue sizing after oil-to-gas conversion. PSEG Long Island’s conversion programs incentivized or mandated fuel switches, but many contractors never properly resized the flue. An oversized flue for a high-efficiency gas appliance causes condensation that corrodes metal components and deteriorates mortar. We measure, we calculate, we install the right liner diameter.
- Freeze-thaw mortar deterioration accelerated by moisture intrusion. Hicksville’s humid continental winters - repeated freeze-thaw cycles - destroy mortar joints in aging brick. The salt-laden maritime air from Long Island Sound speeds oxidation of metal chase covers and flue components. Uncapped abandoned flues pour cold air and moisture directly into the stack, compounding the damage.
Pricing for Chimney Liner & Rebuild in Hicksville, NY
| Service | Typical Range in Hicksville |
|---|---|
| Stainless Steel Liner (standard flue) | $2,800 - $4,500 |
| Flexible Liner Installation | $2,800 - $4,500 |
| Liner Replacement (remove and replace) | $2,200 - $4,000 |
| Partial Rebuild (crown + upper courses) | $3,500 - $6,500 |
| Full Chimney Rebuild | $8,000 - $15,000 |
| Level-2 Camera Inspection | $250 - $350 |
These are real numbers for Hicksville’s market, based on typical ranch and Cape Cod chimney configurations. Tall chimneys on split-levels, difficult roof access, or extensive brick matching can push costs toward the higher end. We give you the full price before we start - no surprises on the bill. Call (855) 950-3861 for a free estimate. We also honor a permanent 5% Senior and Veteran discount, and we offer $50 off any repair over $250.
We Also Serve Cities Near Hicksville
Our Chimney Liner & Rebuild team works throughout Nassau County, including Hicksville and neighboring Jericho, New Cassel, Westbury, and Salisbury. The same housing stock, the same oil-to-gas conversion history, the same need for proper relining and rebuild work. If you’re in one of these communities and your chimney was built in the 1950s or 1960s, we should talk.
Serving Hicksville, NY - Our Local Coverage Area
We’re based in the Hicksville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Liner & Rebuild in Hicksville
Yes, it often is. If the oil flue was bricked over at the basement level but left open at the crown, you have an uncapped shaft that drafts cold air, moisture, and debris directly into your chimney structure. This creates a potential carbon monoxide pathway and accelerates mortar deterioration. We inspect this condition with our Level-2 camera and seal it properly with a chase cover or full rebuild as needed. Call (855) 950-3861 to schedule - estimates are free.
Most Hicksville chimneys can be relined if the exterior brick and structure are sound. We recommend a full rebuild when there’s extensive spalling brick, compromised lateral stability, or multiple flue failures throughout the structure. Our Level-2 inspection gives you photos and a plain-English verdict so you can decide with confidence. Call (855) 950-3861 for an exact assessment.
Hicksville’s post-WWII housing stock was built fast and designed for oil heat. Decades of oil-to-gas conversions - many without proper relining - left thousands of chimneys with oversized flues, abandoned oil flues, and terra cotta liners past their service life. The combination of age, conversion shortcuts, and Nassau County freeze-thaw cycles creates conditions we don’t see to the same degree in newer construction markets. Call (855) 950-3861 if you suspect your chimney has hidden issues.
PSEG Long Island’s conversion programs focus on the appliance and fuel delivery, not chimney compliance. Many Hicksville homeowners discovered later that their chimney was never properly resized or relined for the new gas equipment. The National Fuel Gas Code and NFPA 211 specify proper flue sizing for safety and efficiency. We size and install liners to code, regardless of what the original conversion contractor did or didn’t do. Call (855) 950-3861 for a compliance inspection.
A properly installed DuraFlex stainless steel liner carries a lifetime warranty and typically lasts 20 to 30 years or more in Hicksville conditions. The key factors are proper sizing, correct installation, and keeping the chimney crown and cap maintained to prevent water intrusion. We include liner maintenance guidance with every installation. Call (855) 950-3861 if you have questions about your existing liner’s condition.
Ready to get your Hicksville chimney inspected? Call (855) 950-3861 now - a live person answers 24/7. Free estimates. No-hassle upfront pricing. The 90-Day Done Right Promise, in writing, no arguing.
Written by Frank Calucci, Owner at Hearthstone Chimney Co., serving Hicksville and Nassau County since 1984.