Fast, Reliable Chimney Liner & Rebuild Across Staten Island
Chimney liner replacement and full rebuilds on Staten Island typically run $2,800-$7,500 depending on the scope, and most of our Chimney Liner & Rebuild team can reach any south-shore neighborhood within 45 minutes. We’re familiar with the island’s split-level ranches along Amboy Road, the colonials tucked behind Great Kills Park, and the post-Sandy rebuilds lining Father Capodanno Boulevard. Our trucks carry DuraFlex and Olympia Chimney inventory so we don’t waste your Saturday waiting on parts. Call (855) 950-3861 and a live person answers, 24 hours a day.
Why Hearthstone Chimney Co. of New York City Is Staten Island’s Preferred Chimney Liner & Rebuild Company
We’ve been serving Staten Island since 1984, long enough to remember when the Outerbridge Crossing toll was under two dollars and when Oakwood Beach still had summer bungalows. Our technicians know the difference between a pre-war masonry chimney in Stapleton and a factory-built prefab system in Annadale, and we document every inspection with photos you’ll see on a tablet before we leave.
The 90-Day Done Right Promise governs every liner installation and rebuild we perform on Staten Island. In writing. No arguing. If it’s not right, we come back.
Our phones are staffed by a live person every hour of every day, not a callback queue. Most jobs finish in a single visit because our trucks are stocked for the island’s longer drive times. Background-checked, uniformed technicians. Upfront pricing - the number on the estimate is the number on the invoice.
Frank Calucci has built this company on the K.E.Y.S. code: Krafted right, Every time, Your home first, Standing behind it. That’s why Staten Island homeowners who’ve been burned by contractors before tend to stay with us.
Our Chimney Liner & Rebuild Services in Staten Island
Stainless Steel Liner Installation
Staten Island’s south-shore salt air chews through lesser materials. We install DuraFlex and Olympia Chimney stainless systems rated for coastal exposure, with proper top plates and rain caps that keep the bay’s weather out of your flue. A stainless liner in a Tottenville ranch or a Great Kills colonial handles the higher moisture load that inland manufacturers don’t always account for. Most installations complete in one day.
Flexible Liner Systems
Older masonry chimneys on the north shore - St. George, New Brighton, the Victorians along Richmond Terrace - often have offset flues or narrow passages that rigid pipe won’t navigate. Flexible liners thread these obstacles without breaking into walls. We size them correctly for the appliance, which matters more than most homeowners realize. An undersized flexible liner in an oversized firebox creates drafting problems you’ll notice every winter.
Liner Replacement
This is where Staten Island’s unique history matters. In post-Sandy rebuild zones along the south shore - Oakwood Beach, New Dorp Beach, Midland Beach - many chimney repairs and relinings were performed without full NYC DOB permits under emergency conditions. Local technicians must verify that any relining meets current NYC code before issuing a clearance. We recently worked on a ranch home on Seaside Boulevard in Oakwood Beach, where a post-Sandy rebuild had a stainless steel DuraFlex liner installed hastily without proper support. We pulled the old liner, installed a new DuraFlex system with a top plate and rain cap, and sealed the chase cover - all in one trip, because our crew brings a full inventory of chimney parts for Staten Island’s long drive times.
Partial Rebuild
Spalling brick, deteriorated mortar joints, or a cracked crown don’t always require starting from scratch. We rebuild chimney sections from the roofline up, matching existing brick where possible. On south-shore homes, we use mortar mixes formulated for coastal freeze-thaw cycles - standard Type N mortar degrades faster in salt-laden air.
Full Chimney Rebuild
When a chimney has shifted off its foundation, suffered structural fire damage, or reached the end of its service life, we dismantle and rebuild. A typical Staten Island ranch chimney rebuild takes 3-5 days, weather permitting. We pull permits through the NYC DOB, coordinate inspections, and keep the work site clean. No shortcuts on flashing, no guesswork on clearances.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Staten Island
We work exclusively with professional-grade materials: DuraFlex for stainless liners that withstand Staten Island’s coastal corrosion, HeatShield for cerfractory resurfacing when the flue surface is sound but the mortar is not, and Gelco and Famco for chase covers and caps that keep nor’easter rain out of prefab systems. Our trucks stock the common sizes for the island’s dominant housing types - ranch and split-level chimneys from the 1960s through 1980s - so we’re not driving back to the warehouse while your fireplace sits open.
Common Chimney Liner & Rebuild Problems We See in Staten Island Homes
- Improperly installed post-Sandy relining that doesn’t meet current NYC DOB code. After Hurricane Sandy’s 2012 surge, emergency repairs across Midland Beach and Oakwood Beach often skipped permitting. We find unsupported liners, incorrect clearances to combustibles, and missing termination caps. These require tear-out and reinstallation by a certified crew before the chimney can be cleared for use.
- Salt-laden coastal air accelerating corrosion on stainless liners and prefab components. Homes facing the Lower New York Bay and Arthur Kill - particularly south of Hylan Boulevard - see faster degradation of metal chase covers, termination caps, and even 316-alloy stainless liners. We specify heavier-gauge materials and more frequent inspection intervals for these properties.
- Oversized ranch chimneys with fireboxes too large for standard liner sizing. The mid-island building boom produced thousands of ranches with generous brick fireplaces. A liner sized for a modest insert will not draft properly in a 36-inch open firebox. We calculate NFPA 211-compliant sizing and upgrade to larger-diameter systems when the appliance demands it.
- Failed refractory panels in factory-built prefab fireplaces past their 25-30-year design life. Staten Island has more working residential fireplaces per capita than any other NYC borough, and most are original to 1960s-1980s construction. Cracked or heat-damaged panels in Heatilator, Superior, or Lennox units require manufacturer-specific replacements, not generic substitutes.
Pricing for Chimney Liner & Rebuild in Staten Island, NY
A typical stainless steel liner installation in Staten Island runs $2,800-$4,200 for a standard ranch or colonial with straight vertical flue. Flexible liner systems in offset masonry chimneys range $3,200-$4,800. Liner replacement with full removal of an existing failed system - common in post-Sandy rebuilds - runs $3,500-$5,500 depending on access and whether the chase cover needs replacement. Partial rebuilds from the roofline up start around $4,500 and climb with scaffolding complexity and brick matching. Full chimney rebuilds on Staten Island ranches average $6,500-$7,500.
What moves the number: chimney height, roof pitch, accessibility for scaffolding, whether the existing liner must be extracted from a tight chase, and whether NYC DOB permit fees apply. We provide no-hassle upfront pricing after our Level-2 camera inspection. The estimate is free. The number on the estimate is the number on the invoice.
Standing offers: $50 off any repair over $250, free second opinion on any written estimate, $89 seasonal tune-up, and a permanent 5% senior and veteran discount.
| Service | Typical Range in Staten Island |
|---|---|
| Stainless steel liner installation | $2,800 - $4,200 |
| Flexible liner system (offset flue) | $3,200 - $4,800 |
| Liner replacement with removal | $3,500 - $5,500 |
| Partial rebuild (roofline up) | $4,500 - $6,500 |
| Full chimney rebuild | $6,500 - $7,500 |
We Also Serve Cities Near Staten Island
Our Chimney Liner & Rebuild in Staten Island coverage extends throughout the borough, including New Springville near the Staten Island Mall, Midland Beach along Father Capodanno Boulevard, New Dorp and New Dorp Beach south of Hylan Boulevard. Same-day response, same stocked trucks, same upfront pricing.
Serving Staten Island, NY - Our Local Coverage Area
We’re based in the Staten Island area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Liner & Rebuild in Staten Island
Yes, any chimney liner replacement in New York City requires a permit from the NYC Department of Buildings. We handle the permit application, schedule the required inspections, and ensure the work passes before we issue your clearance documentation. Call (855) 950-3861 and we’ll walk you through the timeline - estimates are free.
You need a Level-2 camera inspection by a certified technician who understands post-Sandy emergency work. We document the liner’s support system, clearance to combustibles, and termination hardware with photos you can see, then compare against current NYC DOB requirements. Many emergency relinings from 2012-2014 lack proper documentation. If yours doesn’t pass, we quote replacement with full permitting. Call (855) 950-3861 to schedule - estimates are free.
316-alloy stainless steel from DuraFlex or Olympia Chimney is the standard we recommend for south-shore and east-shore homes exposed to salt-laden air. It resists the chloride corrosion that degrades lesser alloys faster than comparable inland installations. For prefab fireplace systems, we specify manufacturer-approved components rather than generic substitutes. Call (855) 950-3861 for material recommendations specific to your location.
Most full rebuilds on Staten Island ranches take 3-5 business days, weather permitting. Day one is demolition and footing inspection. Days two through four are masonry construction with proper curing intervals. Day five is final inspection, cap installation, and cleanup. Complex scaffolding on steep pitches or tight lots can add a day. Call (855) 950-3861 for a timeline based on your property.
Prefabricated metal chimneys require manufacturer-specific replacement parts, not generic liner inserts. We service Heatilator, Superior, Lennox, and other common brands found in Staten Island’s 1960s-1980s split-levels. If the chimney structure is intact, we replace damaged chase covers, termination caps, and refractory panels with OEM-grade components. If the metal chase has rusted through, we may recommend conversion to a masonry surround with proper stainless liner. Call (855) 950-3861 - we’ll inspect and give you a plain-English verdict.
Written by Frank Calucci, Owner at Hearthstone Chimney Co. of New York City, serving Staten Island since 1984.